Projects

Research & Applied Case Studies

Systems-level walkthroughs of real subsurface engineering problems — the data, the trade-offs, and the decisions. Each case study shows how the fundamentals apply when real constraints are on the table.

module 5 3 2.webp
Featured · Carbon Capture & Storage

Well Integrity in CO₂ Storage Wells

An applied look at how well integrity principles apply specifically to carbon capture and storage operations — covering barrier design, monitoring, and long-term containment assurance under regulatory scrutiny.

All Projects

Case Study Library

New case studies are added regularly. Placeholder cards below are ready to be swapped with your next project — just edit the image, label, title, and description.

designer 2.png
Geothermal · Case Study

Geothermal Feasibility Analysis

A systems-level walkthrough of evaluating a site for geothermal energy potential — from geological conditions to cost-benefit analysis over a 10-year horizon.

image 2.webp
Well Stimulation · Case Study

Hydraulic Fracturing Design Trade-offs

Comparing fracture geometry, proppant selection, and conductivity outcomes across real well design scenarios.

module 6 3 7.webp
Petroleum · Case Study

Production Optimization Under Constraint

Placeholder — replace with your next case study. A nodal analysis walkthrough balancing drawdown limits, artificial lift options, and facility constraints.

module 6 3 8.webp
CCS · Case Study

Site Screening for CO₂ Storage

Placeholder — replace with your next case study. Ranking candidate formations on capacity, injectivity, and containment risk using public datasets.

oil 1 5.jpg
Drilling · Case Study

Stuck Pipe Prediction with Field Data

Placeholder — replace with your next case study. Applying data-driven models to real drilling parameters to flag stuck-pipe risk before it happens.

designer 2.png
Geothermal · Case Study

Repurposing Wells for Geothermal Heat

Placeholder — replace with your next case study. Assessing end-of-life petroleum wells as candidates for closed-loop geothermal retrofits.

What's Inside a Case Study

Built Like Engineering Reports,
Written Like Explanations

01

Real Data & Constraints

Each case study works from realistic field conditions — not idealized textbook setups.

02

The Trade-offs, Explicitly

Every engineering decision has a cost. Case studies show what was weighed and why.

03

Transferable Frameworks

The goal is a decision framework you can carry to your own projects — not a one-off story.

Want the Full Methodology?

The courses go deeper than any single case study — building the complete framework these projects draw from.